Stave Equipment

Stave Cutup System

Now introducing a great option for cutting Stave Bolts. Cooper Machine makes a Cutup System for logs up to 34 inches in diameter. It can include an Infeed Trough Conveyor with WDH-110 chain with log cradles and hold-downs, 84 inch Cutoff Saw, Outfeed Trough Conveyor, Automatic/Manual Push Kickers, Cooper Control System, Starter Panel with VFD drives, and 6’ x 6’ Operator’s Cab. Customizable to your operation. Video being edited - coming soon!

Read More >>

Stave Equalizer

Cooper Machine offers a Stave Equalizer Two Saw Top Arbor Trimmer. This machine feeds from the side and as soon as it gets in it even ends the board and lugs it through the trimmer. This machine manually adjusts from 30 inches up to 48 inches and trims boards from 3/4 inches up to 2 inches thick. Each arbor is mounted on 2" chrome slides and bearings with hand crank sets. The rollcase is a side feed 8', with 4' in the trimmer and 4' out for hand feeding with a 1hp drive. Four sets of board hold-downs over the lug feed. Comes with two 22" diameter saw blades, two 10hp saw arbor motors, 81x lug chain feed, 2hp electric lug chain feed, a starter panel with starters for the machine and a control panel with E-stop, motor start/stop buttons, lug start/stop eyes and a PLC for lug feed control. Frame is 6 @ 20 beam. Built heavier than standard stave equipment.

Read More >>

Incomac IDV Kiln

Incomac is now offering the IDV kiln to Cooperages. Instead of drying the staves for wine outside for months and months and months, now you can dry the staves in the IDV kiln. This kiln dries the staves just like they were outside, but quicker. Call for more information! Kiln models: IDV-20 8,500bf IDV-40 15,000bf IDV-50 20,000bf IDV-60 25,000bf IDV-80 34,000bf 34,000bf is the largest IDV kiln model available.

Read More >>

Stave Horizontal Resaw 1000 model

The 1000 model horizontal resaw works well with cants, slabs and staves. For staves, after the bot goes through the Halving Saw, it continues into a thin kerf Vertical Quartering Saw and then. Further downstream, a Horizontal Resaw will cut a stave blank that will be separated and the remaining quarter will continue on the runaround. This machine has heads mounted on a reinforced frame, 40” (1000mm) diameter fabricated solid steel wheels for 2 or 4” bands. It has one 60hp electrical motor on each head. A variable speed drive for principle motor is included along with a polychain belt drive. Built heavier than other resaws on the market for long usage life and low maintenance.

Read More >>

Stave Quarter Saw SCI-900 Vertical Center Split Resaw

The SCI-900 model has 3 foot diameter fabricated solid steel wheels and can use either a 2 or 4 inch vertical band. This machine has a high tension band with pneumatic system. Includes a fixed pressure guide system. Setworks available. Variable speed to 200 feet per minute. The principal motor is 30hp 50/60 htz and it comes complete with electrical panel. MIT resaws are built heavy for long usage life and low maintenance.

Read More >>